100 or 150 ft of permanent lighting, in one box.
The lighting we install ourselves, boxed for a weekend project. Every wire has its connectors on — no soldering, no splicing, nothing above low voltage.
The wiring is the hard part. We made it the easy part.
Crossing the house usually means going through the attic. Ours is the only kit that ships Class 2 cable approved for in-wall and in-attic use.
Class 2, in-wall & in-attic rated
Every 25 ft data and power extension is Class 2, so it can run through the attic or down a wall — not zip-tied outside.
Twist-lock waterproof connectors
Every piece ends in the same mini twist-lock connector: push, twist, sealed against rain and sprinklers. Small enough to pass through a drilled hole in the soffit.
Low voltage, end to end
The power supply plugs in; everything past it is low voltage. The electrical work is twisting connectors together.
Pre-drilled, pre-spaced
Five holes per one-meter track put a light every 8 inches. Snap the lights in and the spacing is right.
Power where it’s needed
Four fused channels plus injection tees and power extensions keep brightness even to the last light. The lighting calculator shows where power goes.
Only Class 2 rated cable belongs in an attic or wall. Low voltage isn’t enough: code requires wire inside a home, attic included, to be Class 2 (CL2 or CL3 on the jacket). Keep outdoor-only cable outdoors, and lever-clip connectors out of the weather.
Everything for 100 or 150 ft, nothing to source
Every cable arrives with its connectors already on. Track, caps and corners in black or white.
31× / 46×One-meter aluminum tracks, black or white
Painted aluminum, five pre-drilled holes per meter. Hides the wiring and holds every light at the same angle.
30× / 45×Strings of 5 RGBW lights
150 or 225 puck lights with twist-lock connectors. A dedicated white emitter makes warm whites look like real accent lighting.
5×Single lights
To end a run exactly at the roofline. 155 lights total (100 ft) or 230 (150 ft).
4×25 ft Class 2 data extensions
In-wall and in-attic rated, to carry the signal across the attic.
4×25 ft Class 2 power extensions
Same rating, carrying power to the injection points.
4×3 ft data extensions
For gaps, gables and corners.
4×3 ft flat 2-conductor jumpers
24 V and ground only, for short power jumps outside.
4×Power-injection tees
Twist into the run, then twist in the power extension.
4×Waterproof plugs
Seal the last connector of each run.
4×Color-matched corners
Turn corners without a visible gap.
4×Color-matched end caps
A clean finish where each run stops.
1×Controller box
MeanWell 350 W power supply and QuinLED Dig-Quad controller, built and tested. Plus a Lifetime code for your account.
Flat $129 shipping per kit anywhere in the U.S.; we email a delivery date after you order.
Cloud features from the first evening
The kit includes the $149.99 Lifetime code: holidays, sunset timing, game days, Rain Lights and control from anywhere. Plan features · Free vs plan comparison.
Same product. Who’s on the ladder?
A kit, if you like this sort of thing
You’re comfortable on a ladder and twisting connectors together.
An install, if you’d rather not
We install in Okaloosa County, or any installer near you can. Get it installed.
Doing it yourself? Start here. Install training covers connectors, routing and power; Controller setup gets the app running.
More track, more lights, longer runs
Send your list; we reply with shipping and a Stripe payment link. Nothing is charged until you see the total.
| Item | Price | Qty |
|---|---|---|
| Parts subtotal Shipping and any sales tax quoted separately | $0.00 | |
Opens your email app with the list filled in. Or call or text (850) 393-1519 or write to [email protected].
100 ft for $1,200 or 150 ft for $1,800
Kits are out of stock right now. Call or text or email us and we’ll let you know when they’re back.
Not sure of length? Try the lighting calculator.
Address and card go on Stripe’s secure page; we never see your card.
Need more parts? Order extras. Or order by email or phone: